Hughes WARP7 User Manual download pdf (Page 8)

FOOTSWITCH: Jack designed to take a standard

footswitch (the HUGHES & KETTNER

FS-1 will do

nicely) for switching back and forth between the

CLEAN and WARP channels. To do this, the

CHANNEL SELECT switch on the front panel must

be set to CLEAN (red LED does not light up).

PHONES: Connect headphones to this jack.

The head’s SPEAKER OUT is automatically

disconnected when you insert a plug into this jack.

On the combo, both the SPEAKER OUT and

internal speaker are disabled, ensuring

conciliatory relationships with landlords.

REAR PANEL:

MAINS: Connect the included Euro norm mains

cable to this socket. Before you plug in the mains

cord, ensure your local mains voltage matches

the specification indicated on the device.

SPEAKER OUTPUTS:

Serial (combo): Designed to connect an auxiliary

cabinet with a minimum impedance of 4 ohms.

Unless of course you want to use the WARP 7™

one last time as a hot air grill, barbecuing it in the

process. That’s an option we can’t advocate...

Parallel (heads): Designed to connect to the

included 4x12" cabinet and another auxiliary

cabinet with a rating of at least 8 ohms. The

minimum permissible impedance is 4 ohms. This

means if you connect cabinets to both outs, each

cabinet’s impedance may be no lower than

4 ohms! Unless of course…(see above)

3.0 STANDARD SETUP /

CABLE CONNECTIONS

HEAD/COMBO:

4.0 OPERATING THE WARP 7™

Now that you know a bit about the key features,

let’s take a look at how the WARP 7™ handles. This

section also provides useful tips on connecting the

WARP 7™ to other devices.

4.1 SELECTING CHANNELS

You can activate the channels of the WARP 7™

via the front panel CHANNEL SELECT button or an

external footswitch. The HUGHES & KETTNER

range

of accessories offers a footswitch that fits the bill,

the FS 1.

4.2 THE WARP 7™ AND FX DEVICES

WARP 7™ is equipped with a serial effects loop.

This means that the preamp output signal is routed

through an inserted effect device in its entirety,

and that the entire signal is processed. Please

note that the sound quality of the processed

signal depends largely on the quality of the

employed effect device. A sorry signal processor

can corrupt your tone.

WARP 7 - MANUAL

FUSE

SPEAKER OUTS

100 WATTS

4 - 8 OHMS

SPEAKER OUTS

100 WATTS

4 - 8 OHMS

Head version Combo version

Warp_7 Manual 2.5 11.09.2002 10:17 Uhr Seite 8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Comments to this Manuals

No comments

Hughes WARP7 User Manual Page 8

Comments to this Manuals