Hughes AN6-098P User Manual download pdf (Page 34)

Chapter 2 • Antenna parts and required tools

1037312-0001 Revision A

see Installing a shim for vertical transmit polarization on

page 32.

Cradle-type radio assembly Figure 12 illustrates the cradle-type radio assembly. The main

parts of the radio assembly are mounted on two circular brackets

so they can be rotated, similar to the movement of a cradle, to set

the polarization of the feed horn. The arrows in

Figure 13 indicate

how the radio assembly can be rotated.

Figure 11: Shim for vertical transmit polarization

Figure 12: Cradle-type radio assembly (shown with mounting adapter)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 93 94

Trademarks 2
Important safety information 3
Product warning labels 4
5
Contents 9
• Contents 10
1037312-0001 Revision A 10
Chapter 7 11
Chapter 1 13
Chapter 2 13
Chapter 3 13
Chapter 4 13
Chapter 5 14
Chapter 6 14
• Tables 16
About this document 17
Related publications 18
Revision record 18
Overview 19
The model AN6-098P 20
Antenna installation 21
Tasks related to antenna 22
Approved cables 23
Chapter 1 • Overview 24
Antenna kit 26
(2 boxes) 27
Description of main 28
Figure 4: Antenna reflector 29
Feed horn with 31
Waveguide 31
Radio assembly types 33
Small hardware parts 36
Additional parts for 37
J-type radio 37
Assembling the antenna 39
General instructions for 40
T0172005 41
Top view 41
Side view 41
Attaching the reflector 43
Reflector 45
Securing the feed support 46
Tightening the hardware 47
Installing a shim for 50
Horizontal polarization 53
Installing the radio 54
Attaching the feed horn and 55
A fourth 56
Mounting the radio 57
T0172018 59
Setting polarization for 65
Setting the radio 66
Cabling and connections 67
Routing the cables at 68
Ground connection 69
Connecting the transmit 70
Receive cable 72
Pointing the antenna 73
Antenna pointing 74
Prerequisites for 75
Outdoor pointing 75
HughesNet 76
Adjusting the antenna 77
Adjustment locations on the 78
Setting coarse elevation 79
Fine elevation 80
Receive pointing 80
Initial elevation setting 81
Setting polarization 81
Setting azimuth 82
Peaking the signal 84
(procedure) 84
Isolating the transmit 85
Automatic ACP test 86
° or less changes in 86
Final steps 87
Acronyms and abbreviations 89
• Acronyms and abbreviations 90
• Index 91

Comments to this Manuals

No comments

Hughes AN6-098P User Manual Page 34

Comments to this Manuals