Hughes AN6-098P User Manual Page 14
- Page / 94
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
• Figures
xiv
1037312-0001 Revision A
31. Securing the feed horn clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
32. Attaching the radio assembly to the feed support tube. . . . . . . . . . . . . . . . . . . .40
33. Attaching the radio assembly to the feed support tube. . . . . . . . . . . . . . . . . . . .41
Chapter 5
34. Attaching the feed horn and radio assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .44
35. O-ring in groove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
36. Mounting the radio on the feed support tube . . . . . . . . . . . . . . . . . . . . . . . . . . .46
37. Rear circular bracket with polarization scale . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Chapter 6
38. Transmit and receive cable configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
39. Ground screw on J-type radio assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
40. Ground screw on cradle-type radio assembly. . . . . . . . . . . . . . . . . . . . . . . . . . .52
41. Transmit connector – J-type radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
42. Transmit connector – cradle-type radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
43. Receive connector – J-type radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
44. Receive connector – cradle-type radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Chapter 7
45. OPI (optional pointing tool) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
46. OPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
47. Adjusting elevation, polarization, and azimuth . . . . . . . . . . . . . . . . . . . . . . . . .59
48. Pointing adjustments on the antenna—elevation, polarization, and azimuth. . .60
49. Setting coarse elevation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
50. Fine elevation adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
51. Polarization adjustment on the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
52. Azimuth adjustments on the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
- Trademarks 2
- Important safety information 3
- Product warning labels 4
- 5
- Contents 9
- • Contents 10
- 1037312-0001 Revision A 10
- Chapter 7 11
- Chapter 1 13
- Chapter 2 13
- Chapter 3 13
- Chapter 4 13
- Chapter 5 14
- Chapter 6 14
- • Tables 16
- About this document 17
- Related publications 18
- Revision record 18
- Overview 19
- The model AN6-098P 20
- Antenna installation 21
- Tasks related to antenna 22
- Approved cables 23
- Chapter 1 • Overview 24
- Antenna kit 26
- (2 boxes) 27
- Description of main 28
- Figure 4: Antenna reflector 29
- Feed horn with 31
- Waveguide 31
- Radio assembly types 33
- Small hardware parts 36
- Additional parts for 37
- J-type radio 37
- Assembling the antenna 39
- General instructions for 40
- T0172005 41
- Top view 41
- Side view 41
- Attaching the reflector 43
- Reflector 45
- Securing the feed support 46
- Tightening the hardware 47
- Installing a shim for 50
- Horizontal polarization 53
- Installing the radio 54
- Attaching the feed horn and 55
- A fourth 56
- Mounting the radio 57
- T0172018 59
- Setting polarization for 65
- Setting the radio 66
- Cabling and connections 67
- Routing the cables at 68
- Ground connection 69
- Connecting the transmit 70
- Receive cable 72
- Pointing the antenna 73
- Antenna pointing 74
- Prerequisites for 75
- Outdoor pointing 75
- HughesNet 76
- Adjusting the antenna 77
- Adjustment locations on the 78
- Setting coarse elevation 79
- Fine elevation 80
- Receive pointing 80
- Initial elevation setting 81
- Setting polarization 81
- Setting azimuth 82
- Peaking the signal 84
- (procedure) 84
- Isolating the transmit 85
- Automatic ACP test 86
- ° or less changes in 86
- Final steps 87
- Acronyms and abbreviations 89
- • Acronyms and abbreviations 90
- • Index 91
© 2020, manymanuals.com. All rights reserved. | 1.572 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals